BW3246 - Passive Distributor AS-i/24 V to 1 x M12

IP20:
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.

IP40:

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

IP54:

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.

IP65:
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

IP67:

Dust-tight, full protection against contact, protection against temporary immersion.

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

4 A, changeable:

The internal protection is realized via changeable 4 A fuses (slow-blow) for AS-i and AUX. At each M12 connection ≤4 A are available.

1 A, self-resetting:

The internal protection is realized via self-resetting 1 A fuses for AS-i and AUX. At each M12 connection ≤1 A are available.

8 A, slow-blow fuse + 1 A, self-resetting:

The internal protection is realized via one 8 A slow-blow fuse for AUX and via one self-resetting 1 A fuse for AS-i. At each M8 connection (AUX) ≤6 are available, at each M8 connection (AS-i) ≤1 A are available.

status of in- and outputs is indicated by LEDs. In addition to that, both AS-i LEDs (PWR green and FAULT red) show as usual regarding the AS-i Slaves- the status of the AS-i Slaves. Uaux is indicated by a green LED.

PUR line, oil ans abrasion resistant, appropriate for conveyor chains. Further connection options are available on request.

M12 socket	M12 cable socket, angled	M12 cable socket, straight	M8 cable socket, straight	round cable/connecting wires			profile cable branch	push in terminals
2 x round cables/connecting wires 2,5 mmВІ