Multiturn absolute encoder | UVM36M-******
Article: UVM36M-******
Name: Multiturn absolute encoder | UVM36M-******
Manufacturer: Pepperl-Fuchs
|
|
- Very small housing
- High climatic resistance
- 16 Bit multiturn
- Analog output
- Surge and reverse polarity protection
Datasheet as PDF in following languages: Technical Data: UVM36M-******General specifications | Detection type | magnetic sampling | Measurement range | min. 0 ... 22.5 ° max. 16 x 360 ° | Resolution | 16 Bit (12 bits/revolution) | Electrical specifications | Operating voltage | 12 ... 30 V DC , PELV | Current consumption | typ. 15 mA | Input 1 | Input type | lower limit of measurement range | Signal voltage | | | High | 12 ... 30 V DC | Input 2 | Input type | upper limit of measurement range | Signal voltage | | | High | 12 ... 30 V DC | Analog output | Output type | 1 analog output, voltage | Default setting | rising slope at ccw rotation | Linearity error | ≤ 0.15 % | Connection | Connector | M12 connector, 5 pin | Cable | ∅6 mm, 4 x 2 x 0.14 mm2, 1 m | Standard conformity | Protection degree | acc. DIN EN 60529 | | Connection side | cable models: IP54 connector models: IP65 | | Shaft side | IP54 | Climatic testing | DIN EN 60068-2-3, no moisture condensation | Emitted interference | EN 61000-6-4:2007 | Noise immunity | EN 61000-6-2:2005 | Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms | Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 1000 Hz | Ambient conditions | Operating temperature | cable, flexing: -5 ... 70 °C (-23 ¿ 158 °F), cable, fixed: -30 ... 70 °C (-22 ... 158 °F) connector models: -40 ... 85 °C (-40 ... 185 °F) | Storage temperature | cable models: -30 ... 70 °C (-22 ... 158 °F) connector models: -30 ... 85 °C (-22 ... 185 °F) | Relative humidity | 98 % , no moisture condensation | Mechanical specifications | Material | | | Housing | nickel-plated steel | | Flange | aluminum | | Shaft | Stainless steel | Mass | approx. 150 g , with cable | Rotational speed | max. 12000 min -1 | Moment of inertia | 30 gcm2 | Starting torque | < 3 Ncm | Shaft load | | | Axial | 40 N | | Radial | 110 N |
|
Back to the section
|