PF700 AC Configured Drive, 480 VAC, 3 PH, 18 Pulse (U), 248 Amps (248), 200 HP Normal Duty, NEMA 1 / IP20, Manual Bypass using 800T line (-B51)Automatic Bypass using 800T line (-B52), Drive Input Fuses (-P2)Drive/Bypass Mode Non-Fused Disconnect (-P8)Bypa
Артикул: 21BU248B0ANNCND0NNNN-ND-B51-B52-C1-J2-J4-M3-P2-P8-P10-S51-S65-S67
Наименование: PF700 AC Configured Drive, 480 VAC, 3 PH, 18 Pulse (U), 248 Amps (248), 200 HP Normal Duty, NEMA 1 / IP20, Manual Bypass using 800T line (-B51)Automatic Bypass using 800T line (-B52), Drive Input Fuses (-P2)Drive/Bypass Mode Non-Fused Disconnect (-P8)Bypass Mode Motor Fuse Block (-P10), , , Drive Only Control Power (-C1), 800T Hand/Off/Auto S.S. (Start/Stop/Speed Ref) (-S51)800T Bypass Mode PL & Auto Bypass Enable PL (-S65)800T Motor Fault P.L. (-S67), , Drive Fault Aux. Contact (-J2)Drive Run Aux. Contact (-J4), , Motor Run Meter (Elapsed Time) (-M3)
Производитель: Allen-Bradley
|
|
| BASE DRIVE INFORMATION |
| Input Voltage |
| 480 VAC, 3 PH, 18 Pulse (U) |
|
| Drive Duty Cycle |
|
| Current Rating |
|
| Frame Size |
|
| Enclosure |
| IP20 / NEMA Type 1 MCC Enclosure (B) |
|
|
|
| NOTES |
| Note(s): |
| Information and Data is subject to change. |
| Please confirm information with factory at time of order entry. |
| (Drive Photo may NOT show selected Human Interface Module.) |
|
|
|
| INSTALLED OPTIONS |
| Human Interface Module |
| No HIM (20-HIM-A0) (Blank Plate) (0) |
|
| Drive Unit Documentation |
|
| Brake IGBT |
|
| Brake Resistor |
| Without Drive Mounted Brake Resistor (N) |
|
| Filter Options |
| CM Core without Filter (C) |
|
| Internal Communication Module |
|
| Drive Unit I/O Options |
| Vector Control with 120V I/O |
|
| Feedback Option |
|
|
|
| SYSTEM OPTIONS |
| Bypass Options |
| Manual Bypass using 800T line (-B51) |
| Automatic Bypass using 800T line (-B52) |
|
| Input Power Devices |
| Drive Input Fuses (-P2) |
| Drive/Bypass Mode Non-Fused Disconnect (-P8) |
| Bypass Mode Motor Fuse Block (-P10) |
|
| Control Power |
| Drive Only Control Power (-C1) |
|
| Operator Devices |
| 800T Hand/Off/Auto S.S. (Start/Stop/Speed Ref) (-S51) |
| 800T Bypass Mode PL & Auto Bypass Enable PL (-S65) |
| 800T Motor Fault P.L. (-S67) |
|
| Control Interface |
| Drive Fault Aux. Contact (-J2) |
| Drive Run Aux. Contact (-J4) |
|
| Output Metering |
| Motor Run Meter (Elapsed Time) (-M3) |
|
|
|
| |
