PowerFlex70 AC Configured Drive, 480 VAC, 3 PH (D), 3.4 Amps (3P4), 1.5 HP Heavy Duty, IP20 / NEMA Type 1 (A), Door Mounted Bezel w/ LCD Full Numeric N-1 (C), Brake IGBT Installed (Y), Without Drive Mounted Brake Resistor (N), without CE compliant filter
Артикул: 21AD3P4ACAYNNNC0NNNN-HD-B0-C1-N1-P6-S51-S59-S60-S63
Наименование: PowerFlex70 AC Configured Drive, 480 VAC, 3 PH (D), 3.4 Amps (3P4), 1.5 HP Heavy Duty, IP20 / NEMA Type 1 (A), Door Mounted Bezel w/ LCD Full Numeric N-1 (C), Brake IGBT Installed (Y), Without Drive Mounted Brake Resistor (N), without CE compliant filter (N), No Communication Module (N), Enhanced Control 24VDC Basic I/O (C), Enhanced Control, without Encoder (0), No Bypass (-B0), Control Power for program options only (-C1), Isolated Analog Input - 0-10VDC (-N1), Drive Disconnect Switch (-P6), 800T Hand/Off/Auto S.S. (Start/Stop/Speed Ref) (-S51), 800T Run P.L. (-S59), 800T Drive Fault P.L. (-S60), 800T Control Power On P.L. (-S63)
Производитель: Allen-Bradley
|
|
| BASE DRIVE INFORMATION |
| Input Voltage |
|
| Drive Duty Cycle |
|
| Current Rating |
|
| Enclosure |
|
| Frame Size |
|
| Please Note: |
| Any photos in this documentation are representative of the products supplied and may not be that of the actual unit shipping |
|
|
|
| INSTALLED OPTIONS |
| Human Interface Module |
| Door Mounted Bezel w/ LCD Full Numeric N-1 (C) |
|
| Documentation |
|
| Brake IGBT |
|
| Brake Resistor |
| Without Drive Mounted Brake Resistor (N) |
|
| Filter Options |
| without CE compliant filter (N) |
|
| Internal Communication Module |
| No Communication Module (N) |
|
| Control and I/O |
| Enhanced Control 24VDC Basic I/O (C) |
|
| Feedback option |
| Enhanced Control, without Encoder (0) |
|
|
|
| SYSTEM OPTIONS |
| Bypass Options |
|
| Input Power Devices |
| Drive Disconnect Switch (-P6) |
|
| Control Power |
| Control Power for program options only (-C1) |
|
| Operator Devices |
| 800T Hand/Off/Auto S.S. (Start/Stop/Speed Ref) (-S51) |
| 800T Run P.L. (-S59) |
| 800T Drive Fault P.L. (-S60) |
| 800T Control Power On P.L. (-S63) |
|
| System Feedback |
| Isolated Analog Input - 0-10VDC (-N1) |
|
|
|
| |
