| AS-INTERFACE MODULE SLIMLINE S22.5, DIGITAL, 4A, IP20, 4 X 1 OUTP.,ELECTR., 1A, DC 24V SCREW-TYPE TERMINAL CONNECT. MODULE WIDTH 22.5 MM |
|
General technical data: |
Design of the product | | SlimLine S22.5 - I/O modules for operation in the control cabinet, IP20 |
Design of the slave type | | standard slave |
Type | | 4 outputs |
I/O configuration | | 8 |
ID/ID2 code | | 0/F |
Protocol / will be supported / AS interface protocol | | Yes |
AS interface / total current input / max | mA | 40 |
operating voltage | | |
- according to AS-Interface spezification
| V | 26.5… 31.6 |
Addressing | | front addressing socket |
Design of the electrical connection / of the inputs and outputs | | screw-type terminals |
Item designation | | |
- according to DIN 40719 extendable after IEC 204-2 / according to IEC 750
| | A |
- according to DIN EN 61346-2
| | K |
note | | An external additional supply (AUX POWER) of 20 to 30 V DC is required for the supply of the output circuits.The additional supply must comply with VDE 0106 (PELV), protection class III. |
|
|
Inputs: |
Number of digital inputs | | 0 |
|
Outputs: |
Number of digital outputs | | 4 |
Type of voltage / of the outputs | | DC |
Output voltage / at 24 V | | |
| V | 22… 24 |
Outputs / external power supply 24 V DC | | using terminals: Terminal 7= L+, Terminal 10 = M |
Outputs | | |
| A | 2 |
Current-carrying capacity | | |
- of the semiconductor output / at DC-13 / at 24 V
| A | 1 |
Design of the switching output | | solid state (PNP) |
Characteristic feature of the output / short-circuit protected | | Yes |
output / Polarity reversal protection | | built-in |
Outputs | | |
| | built-in |
| | built-in |
| | built-in |
|
Status display |
| | yellow LED |
| | green LED |
| | red LED |
|
Assignment of data bits |
| | OUT1 |
| | OUT2 |
| | OUT3 |
| | OUT4 |
|
Ambient conditions: |
Ambient temperature | | |
| °C | -25… 70 |
| °C | -40… 85 |
Protection class IP | | IP20 |
|
Mechanical design: |
Width | mm | 22.5 |
Height | mm | 102 |
Depth | mm | 86 |
Type of mounting | | 35 mm standard rail mounting or wall mounting using push-in lugs |
Conductor cross-section | | |
| | 1 x (0.5 - 4) mm? or 2 x (0.5 - 2.5) mm? |
| | |
| | 1 x (0.5 - 2.5) mm? or 2 x (0.5 - 1.5) mm? |
| | AWG 2 x (20 - 14) mm? |
|
Certificates/approvals: |
AS-Interface certificate | | yes (or requested for in case of new units) |
Approvals | | UL, CSA, shipbuilding (or requested for in case of new units) |
|
| |
| |
|
last change: | Oct 31, 2011 |