| BASIC SWITCH FOR POSITION SWITCH 3SE5112,ATEX METAL ENCLOSURE 40MM WIDE TO EN50041 DEVICE CONNECTION 1X (M20X1.5) 1NO/ 1NC SNAP-ACTION CONTACTS W/O ACTUATOR HEAD |
Manufacturer article number | | |
- of the basic unit included in the scope of supply
| | 3SE5112-0CA00-1DA0 |
|
General technical details: | | |
product designation | | basic switch for standard position schwitches |
Product feature | | ATEX Zone 21/22 |
Insulation voltage | | |
| V | 400 |
Degree of pollution | | class 3 |
Thermal current | A | 6 |
Operating current | | |
| | |
| A | 6 |
| A | 6 |
| A | 6 |
| A | 4 |
| | |
| A | 3 |
| A | 0.55 |
| A | 0.27 |
| A | 0.1 |
Continuous current | | |
- of the slow DIAZED fuse link
| A | 6 |
- of the quick DIAZED fuse link
| A | 10 |
- of the C characteristic circuit breaker
| A | 1 |
Mechanical operating cycles as operating time | | |
| | 15,000,000 |
Electrical operating cycles as operating time | | |
- with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 / typical
| | 10,000,000 |
- at AC-15 / at 230 V / typical
| | 100,000 |
Electrical operating cycles in one hour | | |
- with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026
| | 6,000 |
Repeat accuracy | mm | 0.05 |
Design of the contact element | | snap-action contacts |
Number of NC contacts | | |
| | 1 |
Design of the switching function | | Positive opening with appropriate positive opening actuator head |
Number of NO contacts | | |
| | 1 |
Resistance against vibration | | 0.35 mm / 5g |
Resistance against shock | | 30g / 11 ms |
Ambient temperature | | |
| °C | -25… +85 |
| °C | -40… +90 |
Product specification | | |
| | EN 50041 |
Width of the sensor | mm | 40 |
material | | |
| | metal |
Actuating speed | mm/s / m/s | 0.1… 2.5 |
Minimum actuating force / in activation direction | N | 20 |
Protection class IP | | IP66/IP67 |
Built in orientation | | any |
Cable gland version | | 1x (M20 x 1.5) |
Design of the electrical connection | | screw-type terminals |
Item designation | | |
- according to DIN 40719 extendable after IEC 204-2
| | S |
- according to DIN EN 61346-2
| | B |
|
Certificates/approvals: | | |
General Product Approval | For use in hazardous locations | Functional Safety / Safety of Machinery | | |
| |
| |
|
last change: | Apr 9, 2012 |