The Honeywell SmartVFD HVAC and BYPASS are designed for commercial buildings to deliver the energy savings that building owners and managers need. Efficient install, and commissioning, in a full featured VFD.
Features
Start-up Wizards×All you have to do is tell the VFD whether you have a pump or a fan, enter nominal motor information, and you are up and running.
Graphic Interface×The easy-to-use keypad and interface deliver menu-driven programming and monitoring for fast, uniform commissioning. It's also easy for the building owner or manager to learn and use, helping to reduce service calls. Plus, a manual is built into the keypad for easy access when needed.
Built-in Communications×With BACnetî, N2 and Modbus built in, your customers will enjoy a lower total installed cost and reliable communications with the building management system.
PC Software Wizards×Commissioning, programming and troubleshooting are all a snap thanks to these guided Startup and PID wizards.
Built-in PLC×Another reason why SmartVFD HVAC is a great value for your customer, the built-in PLC eliminates the need for an expensive external controller.
DC Choke for harmonic protection.
Standard RIF Filter×Ensures that EMC/RFI requirements are met.
Bypass Options×Meets specifications and system critical applications with a comprehensive bypass offering.
Real-Time Clock×Battery included.
Fire Mode for safe operation.
Motor Switch Ride-Through--easy, fault-free maintenance.
Product Specifications
Dimensions (in.)
Contact Customer Care
Dimensions (mm)
Contact Customer Care
Weight (lb)
Contact Customer Care
Weight (kg)
Contact Customer Care
Frequency
0 Hz to 320 Hz
Voltage
208 Vac, 230 Vac
Operating Temperature Range (F)
14 F to 122 F
Operating Temperature Range (C)
-10 C to 50 C
Enclosure
NEMA 3R
Relay Outputs
Max. switching load: 250Vac/2A or 250Vdc/0,4A
Horsepower
1 HP
Current Ratings
4.8A
Analog Current Output
0 (4) - 20 mA, max 500 ohm
Bypass
Drive alone
Auto Bypass
No
Drive Family
SmartVFD HVAC
Drive Input Disconnect
No
Type of RFI Filter
EMC Filter
Continuous Output Current
overload 1.5 x High overload current (1min/10min), overload 1.1 x Low overload current (1min/10min)