Sylk-enabled Actuator - 175 lb-in with 2 End Switches || MS3120J3205/U
Артикул: MS3120J3205/U Sylk-enabled Actuator - 175 lb-in with 2 End Switches Honeywell
Product Specifications Application HVAC Dimensions (in.) 9.72 in high x 3.94 in wide x 2.95 in deep Dimensions (mm) 247 mm high x 100 mm wide x 75 mm deep Includes Mounting bracket, self-centering shaft adapter, 3mm crank Weight (lb) 6 lb Weight (kg) 2.72 kg Materials Aluminum housing, Plenum rated plastic access cover Comments Integral 1/2 in. NPSM conduit connection Mounting Direct Coupled Frequency 50 Hz, 60 Hz Approvals, Underwriters Laboratories Inc. UL873, Plenum Rated Electrical Connections Enclosed screw terminal strip (22 to 14 AWG) Operating Humidity Range (% RH) 5 to 95% RH, non-condensing Supply Voltage 24 Vac or Vdc Power Consumption Driving-- 16 VA, Holding-- 5 VA Operating Temperature Range (F) -40 F to +140 F Operating Temperature Range (C) -40 C to +60 C Shipping and Storage Temperature Range (F) -40 F to +158 F Shipping and Storage Temperature Range (C) -40 C to +70 C Approvals, CE 89/336/ECC, 73/23/EEC Approvals, Canadian Underwriters Laboratories Inc. cUL C22.2 No. 24-93 Approvals, C-Tick N314 Environmental, Electrical or Ingress Protection Rating NEMA 2 Internal Auxiliary Switch 2 Maximum Noise Rating Driving (dB(A) @ 1m)-- 40, Holding (dB(A) @ 1m)-- 20 (no audible noise) Stroke 95 ?3 degrees Shaft Dimensions (in.) 3/8 to 1.06 in. round or 3/8 to 11/16 in. square Actuator Type Damper, Valve Control Signal Sylk-enabled Fail Safe Mode Spring Return Torque Rating (lb-in.) 175 lb-in. Torque Rating (Nm) 20 Nm Spring Return Torque/Force (lb-in., lbf) 175 lb-in. Spring Return Torque/Force (Nm, N) 20 Nm Additional Torque Ratings (lb-in.) Maximum Stall-- 300 lb-in. Additional Torque Ratings (Nm) Maximum Stall-- 34 Nm Switches 250 Vac, 5 A res External Auxiliary Switches Available Yes, SW2-US Rotation to Open By switch Rotational Stroke Adjustment Mechanically limited 5 degree increments Timing, Nominal Driving @ 60 Hz-- 90 sec Spring Return Timing Maximum-- 20 sec Feedback Sylk-enabled Shaft Adapter Type Self-centering clamping Manual operation Manual crank Shaft Dimensions (mm) 10 to 27 mm round or 10 to 18 mm square Spring Return Direction By orientation There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.
Назад в раздел
