Model Z General Purpose, Gage/Absolute Pressure Transducer, 0.5 psig/a to 60,000 psig/a, 17-4 PH Stainless Steel, Wetted Material For Ranges Up to 2,000 psi and 15-5 PH Stainless Steel, Wetted Material For Ranges 2,000 psi and Greater, Hermetically Sealed

Артикул: 060-0761-29ZG Наименование: Model Z General Purpose, Gage/Absolute Pressure Transducer, 0.5 psig/a to 60,000 psig/a, 17-4 PH Stainless Steel, Wetted Material For Ranges Up to 2,000 psi and 15-5 PH Stainless Steel, Wetted Material For Ranges 2,000 psi and Greater, Hermetically Sealed, 0.25 % Accuracy, Intrinsically Safe Available || 060-0761-29ZG Производитель: Honeywell Description The Model Z pressure transducers are sensors manufactured out of 17-4 PH stainless steel, wetted material for ranges up to 2,000 psi, 15-5 PH stainless steel, wetted material for ranges 2,000 psi and greater. These pressure transducers are built for rugged, industrial applications that require high accuracy and measurement stability. Pressure ranges span from 0.5 psi to 60,000 psi. They utilize complete four-arm 350 ohm strain gauge bridges. The Model Z is available with a variety of options for extended temperature operation, electrical terminations, wetted material and high-level outputs including 5 Vdc or 10 Vdc and 4 mA to 20 mA. Most high-level output models have internal shunt calibration circuits as a standard feature to allow easy setup of the sensor to the data system. An optional internal signature calibration chip provides calibration information for automatic setup with the Model SC four-or-twelve channel digital indicator. The Model Z is a strain gauge-based transducer. This design references the primary pressure sensing diaphragm to the atmosphere and provides a stable zero regardless of the transducer environment. The absolute Model Z has an all-welded, vacuum reference chamber ensuring long-term stability. Features 0.25 % accuracy 0.005 % F.S./°F temperature effect 0.5 psig/a to 60000 psig/a range mV/V, 4 mA to 20 mA, 0 Vdc to 5 Vdc, or 0 Vdc to 10 Vdc available outputs All-welded, stainless steel construction Intrinsically safe available (2N option only)16 CE approved Potential Applications Engine and transmission test stands Fluid pump pressure Fuel line pressure and fuel/air ratio Brake assembly test Tire manufacturing mold pressure control Brake and Accelerometer cable test Air bag system fill pressure Pressure brake testing, hydraulic sensor: Brake pedal forces, ABS pressures Well stimulation Coil tubing MWD Wellhead measurement Product Specifications Form Factor General Process, Foil - Pressure Order Code AP131CV,1A,2U,5B,6A Pressure Range 1,000 psi Pressure Unit Gage Accuracy ±0.25 % FS Linearity ±0.15 % FS Hysteresis ±0.10 % FS Output mV/V 4 mA to 20 mA 0 Vdc to 5 Vdc 0 Vdc to 10 Vdc Resolution Infinite Calibration 5-point calibration: 0 %, 50 %, and 100 % of full scale Media Gases, liquids compatible with wetted parts Temperature (Operating) -100 °F to 325 °F up to 1000 psi -100°F to 250°F 1500psi and above Temperature (Compensated) 15 °C to 71 °C [60 °F to 160 °F] Temperature Effect (Zero) 0.005 % FS/°F Temperature Effect (Span) 0.005 % reading/°F Electrical Termination (std) PTIH-10-6P or equiv. (hermetic stainless) Mating Connector PT06A-10-6S or equiv. (AA111) Strain Gage Type Bonded foil Insulation Resistance 5000 mOhm @ 50 Vdc Bridge Resistance 350 Ohm Shunt Calibration Data Included Overload (safe) 50 % over capacity Overload (burst) <5k psi 300 %, 7.5k psi to 10k psi 200 %, 15k psi to 30k psi 70 % Wetted Parts Material 17-4 PH Stainless Steel (<2000 psi), 15-5 PH Stainless Steel (>/=2000 psi) Case Material 304 Stainless Steel Weight 10 oz Pressure Port 1/4-18 NPT male Product Dimensions O38,1 mm x 60 mm [O1.5 in x 2.35 in L] Agency Approvals and Standards CE approved UNSPSC Code 41112110 UNSPSC Commodity 41112110 Pressure Transducer Availability Global Series Name Z

Назад в раздел