Ultrasonic sensor | UB1000+FP1+E6
Артикул: UB1000+FP1+E6
Наименование: Ultrasonic sensor | UB1000+FP1+E6
Производитель: Pepperl-Fuchs
|
|
- Through-beam and direct detection modes
- 2 independent switch outputs
- 4 operating modes can be set
Datasheet as PDF in following languages: Technical Data: UB1000+FP1+E6General specifications | Sensing range | 200 ... 1000 mm | Unusable area | 0 ... 200 mm | Standard target plate | 100 mm x 100 mm | Transducer frequency | approx. 175 kHz | Response delay | ≤ 100 ms | Indicators/operating means | LED green | Power on | LED yellow | switch output 1 switch output 2 | LED red | fault (due to external noise or incorrect adjustment) | DIP-switch | S9 = ON/NO S9 = OFF / NC S10 = ON/Window operation (barrier mode) S10 = OF/independent switch points | Electrical specifications | Operating voltage | 20 ... 30 V DC , ripple 10 %SS | No-load supply current | ≤ 90 mA | Output | Output type | 2 switch outputs PNP, NO/NC | Rated operating current | 200 mA , short-circuit/overload protected | Voltage drop | ≤ 3 V DC | Repeat accuracy | ≤ 1 % | Switching frequency | ≤ 5 Hz | Range hysteresis | ≤ 5 % of the set operating distance | Temperature influence | ≤ 0.17 % / K | Approvals and certificates | UL approval | cULus Listed, General Purpose | CSA approval | cCSAus Listed, General Purpose | Ambient conditions | Ambient temperature | -10 ... 50 В°C (14 ... 122 В°F) | Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) | Mechanical specifications | Protection degree | IP65 | Connection | terminal compartment, ≤ 2.5 mm2 conductor csa | Material | | | Housing | PBT | | Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | Mass | 338 g |
|
Назад в раздел
|