Diffuse mode sensor | OBT50-5GM45-E0-V3
Артикул: OBT50-5GM45-E0-V3 Diffuse mode sensor | OBT50-5GM45-E0-V3 Pepperl-Fuchs
Not available for purchase, If you need assistance please contact us sales@quad-industry.com
Very small housing Complete device, no amplifier needed High operating distance Voltage range 10 V ... 30 V DC, output current 100 mA short-circuit protected Optical parts made of glass, easy cleaning Protection degree IP67
Technical Data: OBT50-5GM45-E0-V3 General specifications Reference target standard white 100 mm x 100 mm Light type 880 nm IR light Upper limit of the sensing range 50 mm Ambient light limit ≤ 10000 Lux sun light Indicators/operating means LED yellow switching state, flushing: pre-fault indication Electrical specifications Rated operating voltage 10 ... 30 V DC , residual ripple 20 % UB No-load supply current 15 mA Time delay before availability 20 ms Output Output type 1 switch output E0, NPN, NO Rated operating current 100 mA , short-circuit/overload protected Switch-on delay 3 ms Switching frequency ≤ 250 Hz Range hysteresis 10 % typ. Standard conformity Standards EN 60947-5-2 Ambient conditions Ambient temperature 0 ... 55 °C (32 ... 131 °F) Mechanical specifications Protection degree IP67 according to EN 60529 Connection V3 connector (M8 x 1), 3 pin Material Housing brass, nickel-plated Optical face Scratch resistant mineral glass lens Mass 9 g
Назад в раздел
