Splice sensor | UGB-18GM-200-2E3
Артикул: UGB-18GM-200-2E3 Splice sensor | UGB-18GM-200-2E3 Pepperl-Fuchs
Not available for purchase, If you need assistance please contact us sales@quad-industry.com
Ultrasonic system for splice detection Short version Insensitive to printing, colors, and shining surfaces Very high processing speeds are possible.
Datasheet as PDF in following languages:
Technical Data: UGB-18GM-200-2E3 General specifications Sensing range 20 ... 60 mm , optimal distance: 45 mm Transducer frequency 205 kHz Indicators/operating means LED green Display: readiness LED yellow Display: splice detected LED red Indication: No sheet detected (Air) Electrical specifications Operating voltage 18 ... 30 V DC , ripple 10 %SS No-load supply current < 60 mA Input Input type TEACH-IN input B ... -UB + 1VB - 1 V ... +UB Pulse length ≥ 500 ms Impedance ≥ 10 kΩ Output Output type 2 switch outputs PNP, NC Rated operating current 2 x 100 mA , short-circuit/overload protected Voltage drop ≤ 2 V Switch-on delay ≤ 600 µs Switch-off delay ≤ 600 µs Pulse extension ≥ 120 ms programmable Standard conformity Standards IEC / EN 60947-5-2:2004 C-UL listed: 57M3, IND CONT. EQ., "Powered by Class 2 Power Source" Ambient conditions Ambient temperature 0 ... 60 °C (32 ... 140 °F) Storage temperature -40 ... 70 °C (-40 ... 158 °F) Mechanical specifications Protection degree IP67 Connection 2 m PVC cable 0.14 mm2 Material Housing nickel plated brass; plastic components: PBT Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam Mass 150 g
Назад в раздел
