Segment Protector for Cabinet Installation | R2-SP-IC*

Артикул: R2-SP-IC*
Наименование: Segment Protector for Cabinet Installation | R2-SP-IC*
Производитель: Pepperl-Fuchs



  • 4 ... 12 outputs Ex ic (FISCO or Entity) or non-incendive (Div 2)
  • Advanced fault isolation at the spur
  • Segment Protector in Zone 2/Div. 2
  • Instruments in Zone 2/Div. 2 or Zone 1/Div. 1
  • For FOUNDATION Fieldbus H1 and PROFIBUS PA
  • Advanced Diagnostics at the spur
  • Power, Com, Diagnostics, and Error LEDs
  • T-connector for easy installation and maintenance
  • Test points for easy troubleshooting

Datasheet as PDF in following languages:


Technical Data: R2-SP-IC*

Fieldbus interface
Main cable (Trunk)
Rated voltage9 ... 31 V DC
10.5 V DC minimum input voltage acc. to FF-846
Rated currentmax. 4.5 A
Outputs
Number of outputssee table "Technical data depending on model"
Number of devices per output1
Rated voltagemax. 31 V
Rated currentmax. 32 mA switch 1, position 1
max. 43 mA switch 1, position 2
Short-circuit current46 mA switch 1, position 1
65 mA switch 1, position 2
Self current consumptionsee table "Technical data depending on model"
Voltage drop main cable/outputsmax. 1.2 V
Voltage drop trunk In/Out0 V
Terminating resistorexternal type M-FT 100 Ω +/- 10 %
Surge protectionTrunk overvoltage protection if voltage exceeds typ. 39 V, max. 41 V
Indicators/operating means
Switchconfiguration of short-circuit current/rated current
LED PWRgreen: Fieldbus voltage > 10 V and fieldbus terminator is deactivated
LED COM/ERRyellow: flashing: fieldbus communication status and physical layer diagnostic status
LED SPURSred: 2 Hz flashing in short-circuit condition
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Standard conformity
Electromagnetic compatibilityNE 21:2006
Protection degreeIEC 60529
Fieldbus standardIEC 61158-2
Climatic conditionsIEC 60721
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-6
Ambient conditions
Ambient temperature-50 ... 70 В°C (-58 ... 158 В°F)
Storage temperature-50 ... 85 В°C (-58 ... 185 В°F)
Relative humidity< 95 % non-condensing
Shock resistance15 g 11 ms
Vibration resistance1 g , 10 ... 150 Hz
Corrosion resistanceacc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection typeremovable screw terminals with retaining screws
Core cross-sectionmax. 2.5 mm2 /AWG 12-24
Housing materialPolycarbonate
Protection degreeIP20
Masssee table "Technical data depending on model"
Dimensionssee table "Technical data depending on model"
MountingDIN rail mounting
Data for application in connection with Ex-areas
EC-Type Examination CertificateTГњV 12 ATEX 098651 X
Group, category, type of protection, temperature classEx-Hexagon II 3 G Ex nAc [ic] IIC T4
Supply
Maximum safe voltage35 V
Outputs
Voltage32 V
Current46 mA switch 1, position 1
65 mA switch 1, position 2
Inductance0.25 mH switch 1, position 1
0.125 mH switch 1, position 2
Capacitance60 nF
Directive conformity
Directive 94/9/ECEN 60079-0:2009 ,
EN 60079-11:2012 ,
EN 60079-15:2010
International approvals
IECEx approvalIECEx TUN 12.0015 X
Approved forEx-Hexagon Ex nAc [ic] IIC T4
Certificates and approvals
Marine approvalpending


Назад в раздел