| Supply |
| Rated voltage | 7.2 V DC , battery operated |
| Electrical specifications |
| Output rated operating current | 4 ... 20 mA |
| Supply | loop power for field devices
voltage 8 ... 23 V DC, adjustable in steps of 0.1 V |
| Input |
| Connectable field devices | usable for:
- one point-to-point connection with a HART field device, or
- one point-to-point connection with a 4 ... 20 mA field device, or
- up to four externally powered HART field devices operating in multidrop mode |
| Connection | terminals 1, 2, 3, 4, 5, 6
multiple wirings available , depending on operating mode |
| Current | 4 ... 20 mA |
| HART communication | |
| Protocol | HART 7.1, backward compatible |
| Number of devices | - one passive 4 ... 20 mA/HART field device
- up to 4 HART field devices in multidrop mode |
| Transfer rate | 1200 Bit/s |
| Parameters | primary/secondary master, preambles, retries and short address scan ranges |
| Output |
| Output variables | PV: loop current
SV, TV, QV:configurable according to user requirement
- adapter: temperature, battery voltage, energy consumed and estimated battery life-time
- 4 ... 20 mA device: scaled or linearized process value
- HART device: up to four process variables |
| Transfer characteristics |
| Accuracy | current input: 0.125 % of measuring range |
| Influence of ambient temperature | current input: 5 µA/K |
| Indicators/settings |
| Parameter assignment | - wireless transmit power: configurable to 0 dBm or 10 dBm (EIRP)
- device variables mapping
- publishing of up to ten burst messages in a wireless network, period and trigger mode selectable
- notification of up to five events from adapter and/or connected device(s) in a wireless network
- scaling and linearization of 4 ... 20 mA signal of connected analog device
- tuning of supply parameters for the connected device
- locking/unlocking of device parameterization |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2004/108/EC | EN 61326-1:2006 |
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. |
| Directive 99/5/EC | ETSI EN 300328: V1.7.1 (2006-10), ETSI EN 301489-17: V1.2.1 (2002-08), EN 60950:2001 |
| FCC CFR47 Part 15 B and C | ANSI C63.4-2003 |
| Conformity |
| Protection degree | IEC 60529 |
| Ambient conditions |
| Ambient temperature | -40 ... 60 В°C (-40 ... 140 В°F) |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Vibration resistance | 20 ... 2000 Hz, 0,01 g2/Hz |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3
test setup and execution acc. to EN 60068-2-60 |
| Mechanical specifications |
| Protection degree | IP66 |
| Material | plastic |
| Mass | approx. 750 g |
| Dimensions | 91 x 88.5 x 100.6 mm (3.6 x 3.5 x 4 in) (without cable glands and antenna) |
| Mounting | mounting on field device , panel or pole mounting
versions see type code |
| Data for application in connection with Ex-areas |
| EC-Type Examination Certificate | BVS 11 ATEX E 081 , for additional certificates see www.pepperl-fuchs.com |
| Group, category, type of protection, temperature class |  II 2 G Ex ia IIC T4 Gb |
| Directive conformity | |
| Directive 94/9/EC | EN 60079-0:2009 , EN 60079-11:2007 , EN 60079-31:2009 |
| International approvals |
| IECEx approval | BVS 11.0061 |
