Solenoid Driver | HiD2875

Артикул: HiD2875
Наименование: Solenoid Driver | HiD2875
Производитель: Pepperl-Fuchs


Not available for purchase, If you need assistance please contact us sales@quad-industry.com
Оборудование снято с производства, для уточнения замены свяжитесь с нами sales@quad-industry.com

  • 1-channel isolated barrier
  • 24 V DC supply (bus or loop powered)
  • Output 40 mA at 11.2 V DC, 55 mA current limit
  • Contact or logic control input
  • Entity parameter Io/Isc = 93 mA
  • Up to SIL2 acc. to IEC 61508 (bus powered)
  • Up to SIL3 acc. to IEC 61508 (loop powered)

Datasheet as PDF in following languages:


Technical Data: HiD2875

General specifications
Signal typeDigital Output
Supply
ConnectionSL1: 1a(-), 1b(-); 2a(+), 2b(+)
Rated voltage20.4 ... 30 V via Termination Board
21 ... 30 V DC loop powered
Input
ConnectionSL1: 8a(+), 7a(-); 8b(+), 7b(-)
Control inputvoltage free contact or open collector
output on with contact close or transistor on
output off with contact open or transistor off
Input current30 mA with open output
70 mA with 300 Ω load
80 mA with shorted output
Power loss1.2 W at 24 V, 300 Ω load
Inrush current1 A , 0.5 ms loop powered
Output
ConnectionSL2: 5a(+), 5b(-), 7a(+)
Output voltage40 mA at 11.2 V DC, 55 mA current limit
Switching frequencymax. 50 Hz
Response timeturn-on time 1 ms, turn-off time 8 ms, at 300 Ω load
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Conformity
Electromagnetic compatibilityNE 21:2006
For further information see system description.
Protection degreeIEC 60529
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Protection degreeIP20
Massapprox. 140 g
Dimensions18 x 106 x 128 mm (0.7 x 4.2 x 5 in)
Mountingon Termination Board
Data for application in connection with Ex-areas
EC-Type Examination CertificateCESI 02 ATEX 086 , for additional certificates see www.pepperl-fuchs.com
Group, category, type of protectionEx-Hexagon II (1)G [Ex ia Ga] IIC , Ex-Hexagon II (1)D [Ex ia Da] IIIC
Directive conformity
Directive 94/9/ECEN 60079-0:2009, EN 60079-11:2007 , EN 60079-26:2007 , EN 61241-11:2006
International approvals
CSA approval
Control drawing366-005CS-12B (cCSAus)


Назад в раздел