PROFIBUS gateway | KSD2-GW-PRO.485

Артикул: KSD2-GW-PRO.485
Наименование: PROFIBUS gateway | KSD2-GW-PRO.485
Производитель: Pepperl-Fuchs


Not available for purchase, If you need assistance please contact us sales@quad-industry.com
Оборудование снято с производства, для уточнения замены свяжитесь с нами sales@quad-industry.com

  • Connects the Remote Process Interface to the control system/PLC/PC via PROFIBUS
  • Couples the internal CAN bus to the external PROFIBUS
  • Device installation in Zone 2
  • Master function for the internal CAN bus
  • External bus: PROFIBUS DP
  • External baud rate up to 1.5 MBd
  • Separate service connection independent from the DCS or PLC through RS 485 interface in addition to PROFIBUS connection
  • 24 V DC supply voltage
  • Redundant gateway possible
  • EMC acc. to NAMUR NE 21

Datasheet as PDF in following languages:


Technical Data: KSD2-GW-PRO.485

Supply
ConnectionPower Rail
Rated voltage20 ... 30 V DC
Ripple< 10 %
Power consumption2.8 W
Internal bus
ConnectionPower Rail
InterfaceCAN protocol via Power Rail bus with up to 125 units
Cycle time1 device 25 ms
125 devices with discrete input 60 ms
125 devices with discrete output 90 ms
125 devices with analog input 75 ms
125 devices with analog output 110 ms
External bus
Connectionterminals 10, 11, 12; 16, 17, 18
InterfacePROFIBUS acc. to EN 50170/2
Service interface
Connectionterminals 7, 8, 9
InterfaceRS 485
Redundancy
Optionthrough the use of a second gateway
Electrical isolation
Internal/external busbasic insulation acc. to EN 50178:1997, rated insulation voltage 50 Veff AC
Internal bus/power supplynot available
External bus/power supplybasic insulation acc. to EN 50178:1997, rated insulation voltage 50 Veff AC
Service interface/internal busbasic insulation acc. to EN 50178:1997, rated insulation voltage 50 Veff AC
Service interface/external busbasic insulation acc. to EN 50178:1997, rated insulation voltage 50 Veff AC
Service interface/supplybasic insulation acc. to EN 50178:1997, rated insulation voltage 50 Veff AC
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Explosion protection
Directive 94/9/ECEN 60079-15:2005
Standard conformity
Electrical isolationEN 50178:1997
Electromagnetic compatibilityNE 21:2006
Protection degreeIEC 60529
Ambient conditions
Ambient temperature-20 ... 60 В°C (-4 ... 140 В°F)
Damaging gasacc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Protection degreeIP20
Connectionterminal connection ≤ 2.5 mm2
Massapprox. 300 g
Dimensions40 x 100 x 115 mm (1.6 x 3.9 x 4.5 in)
MountingDIN rail mounting
Data for application in connection with Ex-areas
Statement of conformityTГњV 00 ATEX 1617 X , observe statement of conformity
Group, category, type of protection, temperature classEx-Hexagon II 3G Ex nA IIC T4


Назад в раздел