| Supply |
| Connection | Power Rail |
| Rated voltage | 20 ... 30 V DC |
| Ripple | < 10 % |
| Power loss | 1.8 W |
| Power consumption | 2.5 W |
| Input |
| Connection | terminals 1, 2, 3; 4, 5, 6 |
| Input signal | 0 ... 20 mA or 4 ... 20 mA |
| Input resistance | approx. 325 Ω , terminals 1, 2 or 4, 5 |
| Transmitter supply voltage | > 16.5 V at 20 mA |
| Line fault detection | breakage I ≤ 0.8 mA , short-circuit I > 23.2 mA |
| Output |
| Interface | CAN protocol via Power Rail bus |
| Connection | Power Rail |
| Transfer characteristics |
| Deviation | 0.1 % of the input signal range at 20 В°C (68 В°F) |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2004/108/EC | EN 61326-1:2006 |
| Conformity |
| Insulation coordination | EN 50178:1997 |
| Electromagnetic compatibility | NE 21:2006 |
| Protection degree | IEC 60529 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Mechanical specifications |
| Protection degree | IP20 |
| Connection | terminal connection ≤ 2.5 mm2 |
| Mass | approx. 150 g |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 in) |
| Mounting | DIN rail mounting |
| Data for application in connection with Ex-areas |
| EC-Type Examination Certificate | BVS 04 ATEX E 086 , for additional certificates see www.pepperl-fuchs.com |
| Group, category, type of protection |  II (1)G [Ex ia] IIC
II (1) D [Ex iaD] |
| Supply | Power Rail |
| Maximum safe voltage | 40 V DC (Attention! Um is no rated voltage.) |
| Signal | CAN bus and HART (Power Rail) |
| Maximum safe voltage | 60 V DC (Attention! Um is no rated voltage.) |
| HART-connection | terminals 10-, 11+, 12+ |
| Maximum safe voltage | 60 V DC (Attention! Um is no rated voltage.) |
| Input | terminals 1-, 2+; 4-, 5+ |
| Voltage | 27 V |
| Current | negligibly small |
| Voltage | 28 V |
| Current | 115 mA |
| Output | terminals 2-, 3+; 5-, 6+ |
| Voltage | 26 V |
| Current | 93 mA |
| Power | 540 mW (linear characteristic) |
| Statement of conformity | Pepperl+Fuchs |
| Group, category, type of protection, temperature class | II 3G Ex nA IIC T4 X |
| Electrical isolation | |
| Input/power supply, internal bus | safe electrical isolation acc. to IEC 60079-11:2007, voltage peak value 375 V |
| Directive conformity | |
| Directive 94/9/EC | EN 60079-0:2006, EN 60079-11:2007, EN 60079-26:2007 , EN 60079-15:2005 |
